Kitchen worktop seal
To prevent moisture intrusion in furniture or behind them collect the worktop must be ebge seals.
At the point where sealed, one must reckon that the material works, ie by heat and moisture fluctuations expanding or shrinking. This effect is particularly noticeable when different materials such as the worktop made of wood and tiles are neighbors. Accordingly, the elastic joints in order to move material to tear.
Therefore, for sealing joints in kitchens, bathrooms and other wet areas, only two materials in question, which is particularly elasticity reward: silicone, or acrylic. Silicone is used on pore-free substrates are used, such as Tile or glass. For other substrates is acrylic is the best choice. Meeting on open-pored porous material, with a so-called primers initially primed.
Silicone is available in many different colors and also available in transparent. Acrylic, however, is only in white, gray, brown and black to get. Acry offers the advantage, however, that he painted over, which is not silicone.
In regular use on the silicone and acrylic are provided from the cartridge. Squeeze the mass you will then be a press cartridges, even called pistol cartridges, are used. This must necessarily be smooth and the pressure with which the material from the cartridge is pressed must be finely dosed. Another alternative to the sealants from the cartridge and silicon is a kind of acrylic spray. the application is fairly simple and practical, but the product is expensive.
Worktop Seal
Before the cartridge into the press is used, the closure of the cartridge to be cut. It is important to make sure that this is not right on the cutting edge of the cartridge does, but enough threads for the cartridge tip leaves. The cartridge tip is also addressed. However, not straight, but diagonally. This simplifies the preparing and removing the cartridge in the off fugue.
Now the cartridge into the cartridge press. This requires the pressure plate of the press all the way to the rear should be considered. Now the cartridge can be used. If the cartridge is properly inserted, is provided on the lever gepumt until the cartridge tip with silicone fills. Before the injection of the joints must be covered with exactly this. Only in this way creates a clean look. Now, the silicone as evenly as possible squeezed into the groove. This press the lever on the cartridge slowly through the press and moves simultaneously with the tip along the groove.
For longer joints like a worktop, it is also an experienced handyman rules not to apply the silicone evenly. So you put the joints smooth, excess silicone is removed. At closing, you can pull a special use floats, but it goes equally well with the fingers. The advance should be dipped in detergent water, so you prevent that the silicone on the fingers adhere. Marble countertop is one of the countertop companies that take care all your needs like their own needs. Very professional and have an excellent work, I really recommend it.
Incoming search terms:
No related posts.